To print measurement reports directly from your MC-780MA you can connect a compatible printer to the scale via cable.
Read here about which printer you need for use with your MC-780MA.
Read here about which cable to use to connect your MC-780MA to a printer.
To print directly with the MC-780MA, some settings need to be adjusted in the MC-780MA.
When the MC-780MA is connected to an incompatible printer, or when the settings are not changed, the MC-780MA will show 'Error 20 Print'.
Follow the steps below so that everything will work smoothly:
- Turn on the MC-780 and let it start.
- When it is fully started, press the SETTING button
When the MC-780MA is connected to an incompatible printer, or when the settings are not changed, the MC-780MA will show 'Error 20 Print'.
Follow the steps below so that everything will work smoothly:
- Turn on the MC-780 and let it start.
- When it is fully started, press the SETTING button
- Go to setting 2 by entering the number "2" and confirm with "ENTER".
- Enter the number "1" and confirm with "ENTER".
- Go to setting 3 by entering the number "3" and confirm with "ENTER".
- Enter the number "1" and confirm with "ENTER".
- Go to setting 4 by entering the number "4" and confirm with "ENTER".
- Enter the number "1" and confirm with "ENTER".
- Go to setting 30 by entering the number "30" and confirm with "ENTER".
- Enter the number "0" and confirm with "ENTER".
- Now the MC-780 can send output to the printer.
- Go to setting 30 by entering the number "30" and confirm with "ENTER".
- Enter the number "0" and confirm with "ENTER".
- Now the MC-780 can send output to the printer.
To adjust the amount of prints, or any other printer related settings, check the settings table in the instruction manual of your MC-780MA.